Specifications : EEMUA 144 uns 7060x

Standard : EEMUA 144/EEMUA 234

Size : 1/2″ TO 20′ IN,DN15 TO DN500

Outer Diameter : 15mm to 508mm

Wall Thickness : Between 1mm and 11 mm

DIN 86019 Pipes Length : mainly 6meter or required Length

DIN 86019 Pipe Pressure Rating:16bar, 20bar

Types : Seamless less than 419mm ( included 419mm) / Seam Welded ( over 419mm )

End : Plain End, Beveled End

 Grades : 7060x

EEMUA 144 UNS 7060X Pipes Manufacturer and Supplier in China

EEMUA publication 144 standards The specified outside diameters of tubes, in sizes up to and including 450 mm, covered by this Specification have been selected from BS EN 12449:2012 “Copper and copper alloys – Seamless Round Tubes for General

Purposes”: Table 16(1). The specified outside diameters of the remaining sizes covered by this Specification have been selected from BS MA 60 “Summary and application of copper and copper alloy tubes for ships’ pipework systems.”

The wall thicknesses have been selected to cover the specific requirements of the petroleum industries.

This Specification specifies the requirements for seamless and seam-welded tubes for offshore and associated piping installations based on ASME B31.3-2014(3).

EEMUA 144 pipes

The titles of other Publications referred to in this Publication are listed in the References.

EEMUA 144 section 1 is for seamless copper nickel pipe.

EEMUA 144 section 2 is for seam welded copper nickel pipe.

Shihang EEMUA 144 Copper Nickel Pipes pull along with strong anti-corrosion properties which makes them suitable in many fields. We seek to sell you the Shihang EEMUA 144 Copper Nickel Pipe standard that aligns to your particular needs.

Shihang EEMUA 144 Copper Nickel Pipes usually pass a series of strict inspections. Experts in our labs check out their chemical composition to ensure they conform to the right standards. Our customers need to check out the Shihang eemua 144 pdf. This will give them more insight about our Shihang EEMUA 144 Copper Nickel Pipes.

Shihang EEMUA 144 Copper Nickel Pipes come in different grades. Check our Shihang eemua 144 uns 7060x, Shihang eemua 144 uns c70600 and Shihang 90-10 cuni to eemua 144/87.We fabricate the  Shihang EEMUA 144 Copper Nickel Pipes into different sizes and dimensions as well. We want to give you exactly what you asked for.

Shihang EEMUA 144 Copper Nickel Pipes are quite popular in the marine and manufacturing industries. Just make your order. It doesn’t matter the volumes or sizes of copper nickel pipes you need, we are here for you. With our 55KN & 35KN extrusion machine we ensure you receive exactly what want. It takes us about 30 days to deliver your order.

Shihang EEMUA 144 Copper Nickel Pipes are delicate in nature. We transport them safely to get them to arrive safely. However, before this a shrewd customer acknowledges the   essence of settling for proper Shihang eemua 144 dimensions. The Shihang eemua publication 144 outlines everything you need to understand about the Shihang EEMUA 144 Copper Nickel Pipe dimensions.

7060x pipes are connected with 7060x flanges, and 7060x fittings to form the copper nickel pipe system.

Shihang EEMUA 144 Copper Nickel Pipes reach your location in our wooden case packing. We ensure the Shihang EEMUA 144 Copper Nickel Pipes reach our customers in the best condition.

EEMUA 144 UNS 7060X.

The standard has two pressure rate.

16 bar and 20bar.Different pressure rate means different wall thickness.

If you want to download EEMUA 144 standard PDF, please submit your request.

We will reply within 24 hours.

[widgets_on_pages id=”Wide Contact Form”]

You can also check our EEMUA 144 PDF catalogue as below: